Workflow Hub

I created a system to keep records of frozen seafood orders, including PO numbers, dates, item codes, pallet quantities, pounds, cases, and lot numbers. I need to make the system more efficient. Step-by-step: 1. Record each frozen seafood order. 2. Capture the order’s PO number, date, item code, pallet quantity, pounds, cases, and lot number.

I used AI to help investigate a family mystery that had remained unresolved for decades: identifying the biological family of my maternal grandfather. The challenge was not a lack of information. It was almost the opposite. I had DNA matches, family trees, names, dates, historical records, old photographs, obituaries, Facebook genealogy groups, and conversations with possible relatives. The difficult part was connecting all these scattered clues without jumping to conclusions. I built a research workflow in which AI acts as an investigation partner, not as the source of truth. Step-by-step: 1. I gathered the information I already had from genealogy platforms, DNA matches, family trees, historical documents, and family records. 2. I used ChatGPT to organize the evidence into people, dates, locations, relationships, DNA connections, documents, and unresolved questions. 3. I separated the information into three categories: confirmed facts, hypotheses, and missing information. 4. Instead of asking AI, “Who was my grandfather's biological father?”, I asked it to analyze possible family connections and identify which hypotheses were compatible with the available evidence. 5. For each hypothesis, I looked for supporting evidence, contradictory evidence, and information that was still needed. 6. I treated AI-generated connections as leads rather than genealogical proof. The goal was to use AI to decide what to investigate next, not to have it find the answer. 7. I used AI to compare family branches, surnames, generations, locations, and possible relationships among DNA matches whose family connections I did not immediately recognize. 8. When a promising connection appeared, I returned to the original genealogy and DNA sources to verify it. This gradually turned a long list of DNA matches into a smaller number of research paths. 9. I used AI to draft respectful, personalized messages to DNA matches and members of genealogy communities, including people in another country and language. 10. In each message, I explained what I was researching, what connection I suspected, what information I already had, and what I hoped the recipient might be able to confirm or rule out. 11. I treated their responses as new evidence and repeated the investigation loop: evidence → AI analysis → hypothesis → verification → human contact → new evidence → updated hypothesis. The final result is not an “AI-generated family tree.” It is a human-led investigation in which AI helps manage complexity, ask better questions, and identify the next useful action. The most important lesson I learned is that AI is particularly useful in genealogy when you do not ask it to give you the answer. Ask it to help you build the investigation.

I first create my own shortlist of cultural events and collect all the relevant links in a simple text document. Then I give the document to ChatGPT along with my planning criteria. The goal is not to have AI decide what I should attend. I have already chosen the events that interest me. The useful part is turning that scattered shortlist into a realistic yearly plan. ChatGPT checks the event and venue pages, gathers the practical information, and organises everything into a chronological overview divided by month. Under each month, it lists the selected events in date order, including the day, date, location or cultural venue, a short description, and relevant ticket prices. This is especially useful because pricing systems differ between venues. Discounts, subscriptions, social tariffs, and reduced rates may apply in completely different ways. ChatGPT can compare those structures and help me understand what each event would actually cost instead of relying on the headline ticket price. The second planning layer is logistics. For each event, I assess how realistic the trip is by public transport, including the journey there and, importantly, whether getting home after the event is still feasible. I also use separate scores for how strongly I want to attend an event and how easy or difficult the logistics are. This makes it much easier to compare several months at once and decide where my cultural budget and energy are best spent. If an event is too expensive or logistically awkward, ChatGPT can look for practical alternatives, such as another performance date, the same production at a closer venue, a cheaper option, or a similar event that fits the plan better. Step-by-step: 1. I create a personal shortlist of cultural events and collect the relevant links in a simple text document. 2. I give the document to ChatGPT together with my planning criteria. 3. I have ChatGPT check the event and venue pages and organise the selected events into a chronological, month-by-month overview. 4. I include each event’s day, date, location or cultural venue, short description, and relevant ticket prices. 5. I compare discounts, subscriptions, social tariffs, and reduced rates to estimate the actual cost of each event. 6. I assess the public-transport journey to and from each event, including whether getting home afterward is feasible. 7. I score each event separately for how strongly I want to attend it and how easy or difficult the logistics are. 8. I use those comparisons to decide where my cultural budget and energy are best spent. 9. For events that are too expensive or logistically awkward, I ask ChatGPT to identify alternatives such as another performance date, a closer venue, a cheaper option, or a similar event that fits the plan better. The result is a structured yearly planner built from my own cultural shortlist: chronological, budget-aware, and grounded in the realities of public transport.

A reusable Claude Skill called `trust-due-diligence`, packaged as a `.skill` file. It is not a single report; it is a methodology made up of a `SKILL.md` file and three reference documents that teach Claude a repeatable process for investigating a named person, company, coach, or offer before you commit money or trust to them. Once installed, it activates automatically whenever you ask something like “deep dive on X” or “is this legit,” so you do not need to explain the process each time. Step-by-step: 1. Package the `trust-due-diligence` Claude Skill as a `.skill` file. 2. Include a `SKILL.md` file and three reference documents. 3. Use the files together to teach Claude a repeatable due-diligence methodology. 4. Install the Skill so it activates automatically for prompts such as “deep dive on X” or “is this legit.” 5. Use it to investigate a named person, company, coach, or offer before committing money or trust.

I'm planning a housewarming party for about 70 people: 60 adults and 10 children. I knew I wanted to serve a large grazing board, along with a couple of big buckets of ice filled with canned beer, coolers, sparkling water, and other drinks. I told Claude about the party and asked it to create a shopping list based on the number of attendees. Claude produced a cohesive list with six cheeses and approximate quantities for each one. It did the same for the cured meats, crackers, bread, fruit, nuts, jams, and pickled items. It also suggested beverages, including a ratio of beer to coolers and nonalcoholic options. The list included juices and non-caffeinated sodas for the kids, along with a template showing how to lay out the grazing table. This was not a complex use case, but it was very helpful. Step-by-step: 1. I estimated the guest list at about 70 people: 60 adults and 10 children. 2. I described my plan to serve a large grazing board and drinks kept cold in a couple of big buckets of ice. 3. I asked Claude to create a shopping list based on the number of attendees. 4. I used Claude's recommendations for six cheeses, cured meats, crackers, bread, fruit, nuts, jams, and pickled items, including approximate quantities. 5. I reviewed its beverage suggestions, including the beer-to-cooler ratio, sparkling water, juices, and non-caffeinated sodas for the children. 6. I used the layout template to plan how to arrange the grazing table.

I built Shots2Points, a golf scoring app for iPhone and Android, using AI as my development partner. The idea came from organising and playing in golf society events. Stableford scoring itself isn’t particularly complicated, but running an event can be. Organisers have to prepare groups, handicaps, and courses; collect scores from different groups; calculate results; manage withdrawals and ties; and eventually produce a leaderboard. I wanted to simplify that process while also providing an easy scoring app for ordinary casual rounds. The unusual part is how I built it. I’m not a professional software developer, and I don’t have a development team. I started by describing what I wanted the app to do to AI and gradually turned the idea into a working product. My workflow evolved into this cycle: idea → discussion → specification → implementation → real-world test → refinement. I repeat it for each feature. Step-by-step: 1. I define the problem and user experience with ChatGPT. I discuss ideas, challenge assumptions, work through workflows, and decide how a feature should behave before changing the code. 2. Once the behaviour is clear, I turn the idea into an implementation task. I use AI to specify exactly what needs to change, including edge cases and how the new feature should interact with existing functionality. 3. I build and inspect the code with Cursor. Cursor works directly with the project codebase, allowing AI to investigate existing code, implement changes, and report exactly what it changed. I test the result rather than simply accepting AI-generated code. 4. I test development versions on real iOS and Android devices. I follow the actual user journey, take screenshots or capture errors when something isn’t right, and bring those results back into the AI workflow. 5. I use AI to diagnose problems, make another targeted change, and test again. The result is a real cross-platform application rather than a prototype. Shots2Points includes free casual Stableford scoring and an Event Mode designed for golf societies and groups. Organisers can create events, import players, allocate groups, and allow each group to enter scores while everyone follows a live leaderboard. Building the app has required much more than generating code. AI has helped me work through database design, APIs, authentication, in-app purchases, App Store and Google Play requirements, debugging, user-interface decisions, testing, and release management. The biggest lesson for me has been that AI doesn’t remove the need to understand the problem or make decisions. It gives one person access to capabilities that would traditionally have required several different specialists. I provide the product knowledge, requirements, judgement, and testing; AI provides much of the technical capability and an extraordinarily fast feedback loop. That combination allowed me to take a personal idea for improving golf scoring and event management and turn it into a functioning iOS and Android product.

I built a backend operations system for my husband’s general contracting business. It manages new leads, bids and estimates, in-progress jobs, receipts, expense tracking, job photos, invoicing, and other functions he needs—all in one app built with ChatGPT and Base44. I rolled it out in phases. Phase one focused on tracking jobs and their status, phase two added financials, and phase three introduced executive functions. Phase four will cover marketing, although he does not need that right now because he is solidly booked for months. Step-by-step: 1. I built an all-in-one backend operations app using ChatGPT and Base44. 2. In phase one, I added tracking for jobs and their current status. 3. In phase two, I implemented financial functions, including receipts and expense tracking. 4. In phase three, I added executive functions along with other operational features such as leads, bids and estimates, job photos, and invoicing. 5. I planned marketing features for phase four, but postponed them because the business is solidly booked for months.

While traveling abroad, my partner and I became quite sick near the end of our trip and remained ill after returning home. Because we were in a country where we did not speak the language, we used Google Translate at the pharmacy and used Claude to track our symptoms as they changed from day to day. Claude helped us keep the symptom history organized and research what to ask for at the pharmacy, including differences between the medicines we were familiar with and those commonly used in that country. When our symptoms worsened after we got home, we continued using Claude as a symptom tracker and photographed everything in our medicine cabinet. We often forget what we bought or why, and medicines in the United States can be marketed for different uses in ways that are not always clear. Using the symptom history and medicine photos, we asked Claude what we might be able to use, what to avoid, when to take things, and when to contact a doctor, use telehealth, visit urgent care, or go to the emergency room. It also surfaced newer research suggesting that some medicines once thought to be effective may no longer be supported by current evidence. This simple workflow helped us manage the situation and decide whether we needed to buy anything new or seek additional care. Step-by-step: 1. I used Google Translate to communicate at the pharmacy while traveling in a country where we did not speak the language. 2. I described our symptoms to Claude and kept the symptom history updated as they changed from day to day. 3. I asked Claude to research what to ask for at the pharmacy, taking into account the medicines we were familiar with and those used in the country we were visiting. 4. After we returned home and our symptoms worsened, I continued tracking them in Claude. 5. I photographed the medicines in our cabinet so Claude could help us review what we had, what we might be able to use, and what we should avoid. 6. I used the symptom history and medicine information to think through timing, whether we needed to buy anything new, and whether to contact a doctor, use telehealth, visit urgent care, or go to the emergency room. 7. I also asked Claude to check current research, including whether newer studies had changed the understanding of some medicines’ effectiveness.

I built a workflow to select music for a senior fitness class that suits the participants’ general age range and meets the program’s criteria of approximately 120 BPM. I also require the music to be danceable and have a 4/4 beat. After a successful summer using AI-suggested, danceable Motown songs from the 1970s, I continued using AI to help with music selection. I don’t have a music background or the knowledge to do this myself, so I appreciate the help. Yesterday, a participant commented on how enthusiastic she was about the music. Her response was simple: “I love the music.” Step-by-step: 1. I considered the general age range of the senior fitness class participants. 2. I used the program’s target of approximately 120 BPM as a selection criterion. 3. I added my own requirements that the songs be danceable and have a 4/4 beat. 4. I used AI to suggest songs that fit those criteria, including danceable Motown songs from the 1970s during the summer. 5. I used participant feedback to confirm that the music was well received.

I use ChatGPT to turn a physical trading card collection into a structured digital inventory. I start by photographing the collection and uploading the images to Google Drive. I divide the cards into logical groups and store them in separate subfolders, creating a clear structure before identification begins. ChatGPT then works through the folders in manageable batches, using OCR and visual recognition to extract information from the cards. This avoids manually uploading and describing every card one by one. I use consistent processing rules to reduce mistakes: I limit the number of cards per batch, make sure every source image is accounted for, and use one central card per photo when identification could otherwise be ambiguous. For each card, ChatGPT helps identify and organize the information I want to keep: card name, set code, set or series, edition, rarity, language, quantity, approximate year or period, condition notes, confidence level, and the source image. The useful part is not just OCR or card recognition. It is the combination of a structured Google Drive archive, visual identification, consistency checks, and systematic data extraction across a large physical collection. When identification is uncertain, I record that uncertainty rather than silently guessing. Damaged or unusual cards can also receive specific notes, such as foil scratches, edge wear, folds, or other condition issues. Once all folders have been processed, I consolidate the separate batches into one central inventory so I can check duplicates, quantities, and inconsistencies more easily. I first used this workflow for a Yu-Gi-Oh! collection and plan to reuse the same process for a Harry Potter trading card collection. The result is a searchable, structured overview of a physical collection that can later be used for valuation, selling, insurance, cataloguing, or simply knowing what is actually in the boxes. Step-by-step: 1. I photograph the physical trading card collection. 2. I upload the images to Google Drive and divide them into logical groups stored in separate subfolders. 3. I process the folders with ChatGPT in manageable batches using OCR and visual recognition. 4. I limit the number of cards per batch, account for every source image, and use one central card per photo when needed to reduce ambiguity. 5. I extract each card’s name, set code, set or series, edition, rarity, language, quantity, approximate year or period, condition notes, confidence level, and source image. 6. I record uncertainty instead of silently guessing and add specific notes for damaged or unusual cards, such as foil scratches, edge wear, and folds. 7. I consolidate the processed batches into one central inventory to check duplicates, quantities, and inconsistencies. 8. I reuse the process for additional collections, including my planned Harry Potter trading card collection.

I built a custom news agent that skips the Google News and Apple News walled gardens. Eight prompts turn Claude into a personal news editor that reads my trusted RSS feeds, scores every story with a decision model, and delivers a clean daily page for about a dime a month. Each week, pulling two or three good stories for my newsletter digest meant searching multiple sites by hand—hours of clicking and scrolling for a handful of usable links. RSS feeds already deliver that content; the missing piece was a judgment layer that could separate worthwhile stories from noise without the cost or latency of running everything through a full LLM. I used Claude Cowork, Jev from TypeSafe AI, Vercel AI Gateway, RSS feeds, Python, and SQLite. Jev is a decision model rather than a chatbot: it returns a probability and confidence score instead of prose, does not hallucinate facts, and scores a story in a fraction of a second. That makes an automated daily judgment call inexpensive enough to run continuously. Step-by-step: 1. I set up a Claude project to hold the scripts, taste guide, database, and page. 2. I defined the goal and sections, then had Claude interview me to create a short “taste guide” describing what counts as a good story. 3. I found and live-tested the RSS feed for each trusted source instead of guessing feed URLs. 4. I fetched all working feeds into a deduplicated SQLite database and logged failures. 5. I used Jev through Vercel AI Gateway to score every story: first filtering ads and promotions, then ranking stories by section against my taste guide. 6. I selected the winners for each section, with Jev identifying near-duplicate stories so they would not appear twice. 7. I generated one-line summaries and fact-checked them against the source so nothing was invented. 8. I rendered a simple HTML page and scheduled the entire workflow to run every morning. A few details matter. I used Cowork rather than a plain chat because several steps require Claude to work with files, run code, and access the network. I also created a Vercel account and AI Gateway API key manually before the scoring step. Finally, I saved everything to the Claude project instead of a local folder, which allows the morning run to happen in the cloud on its own schedule. Scoring costs roughly $0.10 per month with Jev, compared with a few dollars for a full LLM doing the same job. The workflow turns a two-hour weekly slog into a page that is ready every morning, with each link going directly to the original publisher rather than a Google or Apple aggregator. Full build walkthrough: onabetternote.substack.com/p/build-your-own-news-agent-with-claude — the Substack post includes the exact eight prompts to copy and paste, plus more detail on why a model like Jev matters for cost containment as agents become routine.

I use Claude Desktop on my Mac, connected to Canva and Metricool, to build and schedule social media posts. I used ChatGPT to help me set everything up because it has more history and access to my company knowledge documents. ChatGPT created instruction files for Claude that provide our company context and guidelines. I pointed Claude to our website, which contains many articles, and connected our Canva and Metricool accounts. We discuss suitable topics to post about. Claude reviews the website for relevant articles or landing pages to link to, then suggests a series of Facebook and Instagram posts. It checks the designs in our Canva account, adjusts them as needed, or asks me for photos and other artwork. Claude then builds the posts in Metricool and saves them as drafts for me to review, following our working rules. I review the drafts and move them to pending. Claude checks that they will publish automatically on the correct date and at the correct time, and it creates links with meaningful UTM parameters. After publishing, I can ask Claude to analyze the results, identify what is working and resonating with my market, and help us test different approaches, content, and topics. Metricool captures the data, and Claude uses it to inform the next round of posts. This saves me hours every week, gives me time to work on other things while Claude handles the process, and produces results that are improving each week. Step-by-step: 1. I used ChatGPT to help configure Claude Desktop and create instruction files containing our company context and guidelines. 2. I connected Claude to our website, Canva account, and Metricool account. 3. I discuss potential topics with Claude, and it finds relevant website articles or landing pages to link to. 4. Claude suggests a series of posts for Facebook and Instagram. 5. Claude reviews our Canva designs, adjusts them when necessary, or asks me for photos and other artwork. 6. Claude builds the posts in Metricool and saves them as drafts for me to review according to our working rules. 7. I review the drafts and move them to pending. 8. Claude checks the publishing date and time and creates links with meaningful UTM parameters. 9. After publication, I ask Claude to analyze the results and identify what is resonating with my market. 10. I use the Metricool data and Claude’s analysis to test different approaches, content, and topics in the next round of posts.

Midlifecurious is a newsletter for women navigating midlife—honest, funny, and allergic to being talked down to. Its Sunday issue, the Midlife Missive, is a roundup covering health, wellness, money, beauty, and family. My sister, Claire, edits it; I build the machine behind it. That machine is Missive, a five-part publishing intelligence system that runs the newsletter as one closed loop: scan → triage → publish → measure → remember. It monitors Reddit, search trends, and RSS to identify what midlife women are paying attention to before those topics reach our feeds. Discovery pulls in those sources, ranks every feed using a click-rate-based quality score, and lets Claire triage articles into the week’s issue. Curation composes Sunday’s newsletter and drafts the introduction in her voice. Performance reads the Mailchimp results back into the system and feeds them into the rankings, so strong sources rise and weak ones fall over time. Underneath all four stages is Memory: a vector-searchable corpus of every article, save, rejection, and the reasoning behind each decision. Memory is the real spine of the system. It lets Missive ask editorial questions such as “Have we covered this before?” and “Is this source still earning its slot?” instead of requiring one person to hold everything in her head. We’re a two-person operation: I build with Claude Code, and Claire edits. The system runs on one database for under $25 a month. I built it because the alternative was Claire drowning in a Feedly-and-spreadsheet routine that discarded everything as soon as an issue shipped. We had no record of what we had run and no feedback on what actually landed. My bet is that the corpus is the moat. Claire’s editorial taste—every save, rejection, and “cornerstone” stamp, with the reasoning stored alongside the decision—is a training set no one else has. A system that remembers turns her job from synthesizer into judge. Missive is deliberately internal-only: no SaaS and no customers, ever. That frees me to build for our exact workflow instead of a hypothetical buyer, and to build for 2028 instead of this quarter. The near-term payoff is a calmer Sunday. The long-term goal is a proprietary editorial-intelligence layer we could never buy off the shelf—the foundation for the research and audience products that come next. Step-by-step: 1. I monitor Reddit, search trends, and RSS for topics that midlife women are paying attention to. 2. I pull those sources into Missive and rank each feed using a click-rate-based quality score. 3. Claire triages the ranked articles into the week’s Midlife Missive. 4. Missive composes Sunday’s newsletter and drafts the introduction in Claire’s voice. 5. I import the Mailchimp results so the system can update source rankings based on performance. 6. Missive stores every article, save, rejection, “cornerstone” stamp, and the reasoning behind each decision in a vector-searchable corpus. 7. We use that memory to check whether a topic has already been covered and whether a source is still earning its place. 8. I build and maintain the internal system with Claude Code, while Claire handles editing, using one database that costs under $25 a month.

I use a persistent AI project-orchestration workflow for small-business operations, internal tools, AI-assisted coding, specialist-agent workflows, and projects that need to survive fresh sessions. A root AI receives one bounded objective, reads the project state from files, breaks the work into phases, and delegates implementation to bounded specialist or worker agents. It verifies the results, updates the durable state, and continues until the acceptance criteria are met. This lets me run small-business and coding projects end to end without re-explaining the project every session or manually driving every handoff. The core pattern is: Objective → durable state → root orchestrator → bounded workers → verification → state update → next step → Git checkpoint. Step-by-step: 1. I give the root AI one bounded objective. 2. The root AI reads the current project state from files. 3. It breaks the work into phases and delegates implementation to bounded specialist or worker agents. 4. It verifies the workers’ results. 5. It updates the durable project state. 6. It moves to the next step and creates a Git checkpoint. 7. It continues this cycle until the acceptance criteria are met.

I was overwhelmed by the thousands of emails I receive in my Outlook inbox every month. I didn’t have time to analyze them all, generate relevant responses, or track the replies and progress of each case. I used an Outlook feature and the virtual assistant Perplexity to help handle the task. Here’s the process: Step-by-step: 1. In Outlook, open the correct folder and select all the emails. 2. Go to Export/Import and follow all the required steps. 3. Export the emails as a `.csv` file, name the file, and save it in a specific location. 4. In Perplexity, attach the `.csv` file. 5. Use a prompt such as: I am a strategy manager and would like to propose a collaboration to my colleague David. The dashboard should list all topics discussed, proposed actions for each topic, and the remaining work to be done.

I built a job-offer net-net calculator to determine what a proposed job is actually worth to the employee’s household after taxes, employment-related expenses, benefit changes, commuting costs, and the economic value of commuting time. Gross salary should not be treated as household value. The calculator should interview me first and ask only for information that materially affects the calculation. If I do not know a number, it should identify it as an estimate and use a clearly labeled reasonable placeholder only with my permission. Step-by-step: 1. Collect the proposed annual gross salary. 2. Collect the employee’s state and locality, tax filing status, and other household taxable income when needed to estimate the incremental federal tax burden accurately. 3. Record the work arrangement: fully remote, hybrid, or on-site. 4. Record the number of commuting days per week and working weeks per year. 5. Collect the home location and job location, or the known one-way mileage. 6. Collect the vehicle make, model, year, drivetrain, and approximate MPG when available, along with current annual vehicle mileage if relevant. 7. Collect the gasoline price or ask permission to obtain a current local price. 8. Record tolls, parking, and the expected change in automobile insurance. If the insurance change is unknown, keep it as a clearly labeled placeholder rather than presenting it as fact. 9. Record employee medical, dental, and vision premiums under the proposed job, along with current household medical, dental, and vision expenses that would disappear if the employee accepts the job. 10. Record the employee’s current or previous annual compensation, or another hourly value to use for valuing commuting time. 11. Record any other recurring costs caused by accepting the job and any recurring household expenses that would disappear because of accepting it. 12. Estimate after-tax pay as follows: - Gross salary - Federal income tax - State and local income tax - Social Security - Medicare - Estimated after-tax salary Use current tax rules when web access is available, and distinguish estimated withholding from actual tax liability when relevant. 13. Calculate annual commute miles: - Round-trip miles × commuting days per week × working weeks per year 14. Estimate the incremental cash cost caused by commuting, including fuel, maintenance, oil and service, tires, repairs, tolls, parking, and the incremental auto-insurance premium when applicable. Do not double-count expenses. 15. Separately estimate additional depreciation and other mileage-related economic costs that were not already included. If using an all-in per-mile vehicle-cost benchmark, do not also add its constituent costs separately. Explicitly state which method was used. 16. Calculate annual commuting hours: - Estimated minutes each direction × 2 × commuting days per week × working weeks per year ÷ 60 17. Calculate the employee’s implied hourly value: - Annual benchmark compensation ÷ 2,080 Multiply annual commuting hours by the hourly value to calculate the economic value of commuting time. Treat this as an economic cost, not a cash expense. 18. Calculate the employee’s annual out-of-pocket premiums for medical, dental, vision, and other mandatory benefits. Separately calculate any current household expense that would disappear because the new employer provides that benefit. 19. Calculate the change from the current household baseline. Do not subtract an existing expense and then add the same expense back in the same scenario. 20. Calculate cash net as: - Estimated after-tax salary - Incremental cash commuting costs - Incremental insurance costs - Employee-paid benefit premiums - Other new cash expenses + Current household expenses eliminated by taking the job This represents the approximate improvement in household cash flow attributable to the job. 21. Calculate economic net-net as: - Cash net - Value of commuting time - Incremental vehicle depreciation or other non-cash economic costs not already counted This represents the broader economic value of the job. 22. Start the final output with only these numbers: - GROSS SALARY: $____ - ESTIMATED AFTER-TAX PAY: $____ - ANNUAL CASH NET: $____ - MONTHLY CASH NET: $____ - ANNUAL ECONOMIC NET-NET: $____ - MONTHLY ECONOMIC NET-NET: $____ 23. Then provide the calculation table. 24. Finally, provide the three largest cost items, the three assumptions with the greatest uncertainty, the break-even gross salary at which accepting the job would produce the target household net value I specify, and any information I should verify before making the decision.

I 3D-printed a custom threaded barrel nut without ever opening AutoCAD. I use my 3D printer to make parts for various projects, including a pinball machine and a boat, but I struggle with AutoCAD. As an alternative, I described the part to Claude in plain English and asked it to create a `.3mf` file. I opened the file in Bambu Studio and printed the part without using AutoCAD. Step-by-step: 1. I described the custom threaded barrel nut to Claude in plain English. 2. I asked Claude to create a `.3mf` file for the part. 3. I opened the file in Bambu Studio. 4. I printed the part on my 3D printer.

I built a custom GPT with the personalities of Einstein, Lorentz, Planck, and Compton. Starting with Einstein’s 1920 Leiden lecture, I developed an ontology for physical space based on his description of the “new ether.” I began with E=mc2, E=hf, and my ontological modeling assumptions. I then repeatedly pushed ChatGPT to challenge those assumptions and interpretations logically and mathematically. We used numerous tool calls and reference sites to write and test the math. After many months of working on it in my spare time, the GPT now unifies equations that balance from the atomic scale to the black hole scale, with some remarkable revelations. I summarized much of the work in a paper written by my GPT and am happy to share it so others can expand, improve, and test the work. AI rocks. Step-by-step: 1. I built a custom GPT with the personalities of Einstein, Lorentz, Planck, and Compton. 2. I used Einstein’s 1920 Leiden lecture and his description of the “new ether” to develop an ontology for physical space. 3. I started with E=mc2, E=hf, and my ontological modeling assumptions. 4. I repeatedly challenged the assumptions and interpretations with ChatGPT, focusing on logical and mathematical consistency. 5. I used numerous tool calls and reference sites to write and test the math. 6. After many months of working on the project in my spare time, I summarized much of it in a paper written by my GPT. 7. I am sharing the work so others can expand, improve, and test it.

I had a ChatGPT subscription that I knew I would not use during the coming month, so I wanted to find a productive use for the tokens I would otherwise pay for without using. I created a team of specialized agents on Raft that works persistently in the background. They continue working until all my allotted tokens are used, wait for the tokens to reset, and then continue. I assigned them a project: searching a stretch of LiDAR-mapped dense forest in Slovenia for archaeological discoveries. The agents scan the dataset for meaningful anomalies that could point to potential findings. Anything they identify will be handed over to the Slovenian authorities for further investigation. Even if they find nothing, that result is valuable in its own right. I encourage anyone with an idle AI subscription to use it for something beneficial. There are many publicly available datasets containing potential discoveries that no human would ever have time to examine manually. Step-by-step: 1. I identified a ChatGPT subscription that I would not be using during the coming month. 2. I created a team of specialized agents on Raft to work persistently in the background. 3. I configured the team to work until my allotted tokens were used, wait for the reset, and then continue. 4. I directed the agents to scan LiDAR data from a dense forest in Slovenia for meaningful anomalies. 5. I planned to hand any potential discoveries over to the Slovenian authorities for further investigation. 6. I treated a lack of findings as valuable information as well, since the dataset would still have been examined.