Stretch Your $20 Claude Plan With Fewer Messages
Check your Claude Pro usage, then run a task on fewer messages: Low effort, unused apps off, questions before Claude builds, edits and a clean handoff.
Talk a messy plan into a Claude whiteboard, fix what Claude laid out by hand and by asking, then invite your team to the board.
Rundown Pro
Every course and recording, the certification program and member perks, for $29 a month. Guides stay free.
You'll talk or paste a messy plan into a Claude whiteboard, check and fix the board Claude draws (by hand and by asking), then invite a teammate to it. As of November 2026, Whiteboards is in beta on paid plans only (Pro, Max, Ultra, Team and Enterprise), not Free, and on Enterprise it stays off until an owner turns it on.
Step 1 of 6
Start from the Artifacts tab in Claude's sidebar. Clicking the Whiteboard tile opens a blank board straight away.
Anthropic's help page says you can also ask for a whiteboard in any chat, for example "Start a whiteboard to plan our product launch." We started from the Artifacts tab. Whichever way you start, every whiteboard you make is saved in the Artifacts tab, so that's where you find it again.
Step 2 of 6
Open the board's chat panel and give Claude your plan the way you'd tell a colleague, out loud or typed. Claude builds the first version of the board from it, which took about five minutes in our test.
If you don't have a plan to hand, use ours. It's made up: a customer webinar run by a host, a designer and ops. It leaves the talk track's date vague on purpose, so step 5 has a gap to find.
A messy plan to paste
ok so we're running a customer webinar in three weeks, Thursday December 3. the host writes the talk track and does a dry run the week before. the designer makes the slides and the registration page, and the registration page has to be live by November 20 so we can start promoting. ops sets up the webinar tool, sends the invite emails, then reminders the day before. after the webinar ops sends the recording to everyone who registered. the slides need the talk track first I think, not sure when that's done. can you lay this out as a board with owners and datesThe Dictate microphone only types what you say into the Reply box. Nothing reaches Claude until you send it. The waveform icon is Claude's voice mode, where Claude talks back. Our guide Build a Website Hands-Free With Claude Voice covers it.
Claude works from what's on the board and doesn't read your connected apps, so put any facts it needs into your message. Only you on the card means nobody else can open the board yet.
Step 3 of 6
Claude fills gaps in your plan with its own guesses. Before anyone else sees the board, check every owner, date and arrow against what you said.
On our board the three blue dates were the plan's own: registration page live Fri Nov 20, reminders Wed Dec 2 and the webinar Thu Dec 3. Claude proposed every other date. The plan never said when the talk track would be done, so Claude put Thu Nov 19 on it and marked it Settle first. Claude lays out each plan differently, so your board won't match ours card for card.
Step 4 of 6
A wrong date or a missing task is quicker to fix by hand than by asking. The toolbar at the bottom of the board adds items, and you move and edit them right on the board.
Each button's tooltip also shows its key, such as V for Select and R for Shapes. On a Mac, ⌘Z undid changes on the board in our test. We didn't check the keys on Windows. We used a shape instead of a sticky note because sticky notes print their author's name on the board.
Step 5 of 6
To change one part of the board and leave the rest alone, box that part and ask Claude about it. Here we ask what's missing between the talk track and the slides.
Ask what's missing in one area
What's missing between the talk track and the slides? Add any steps we need, with an owner and a date.In our test the request didn't work on the board. After about a minute a notice said Claude couldn't do that on the board, and Go ahead moved it to the main chat. About four minutes later the board had three new gray cards: Slide outline and Draft feedback in the Host lane, and Slide draft in the Designer lane. Claude also moved Talk track left and Slides right, with their dates unchanged, and its reply said all three new dates were proposals. Anthropic's help page says Claude adds its suggestions to the board for you to check, so your request may work on the board without the notice.
For changes to the whole board, ask in the chat panel instead. The help page's examples are regrouping the board by theme and turning it into a timeline.
Step 6 of 6
A new board is private to you. From Share you invite a teammate by email, pick what they can do and decide who else can open the board.
Anthropic's help page describes the access levels for artifacts in general: a viewer can open it and read comments, a commenter can also comment, and an editor can also make changes.
On Team and Enterprise the menu is different, according to the help page. The field reads Add people, and the choices for who can open the board are Only people invited, Anyone at [your organization's name], and Anyone with the link. Pick Anyone at [your organization's name] to open the board to everyone at work. Anyone with the link only works if an Owner has turned on External sharing. Inviting someone outside your company needs Email invitations outside your organization turned on in Organization settings > Artifacts.
Mark it complete to keep your progress. The background and common questions follow.
Guides stay free. This is what Rundown Pro adds:
$29/mo, cancel anytime
No. There's no separate charge or allowance: working on a board counts toward your plan's usage limits like any other work with Claude. It's only on paid plans (Pro, Max, Ultra, Team and Enterprise), not Free, as of November 2026.
We couldn't confirm it. Anthropic says only that an invited person needs a Claude account under the email you invited, and the invite screen says they can open the board after signing in to Claude. People outside your organization (on Pro, Max and Ultra, everyone but you) can't use the parts of a board that rely on Claude, but with Editor they can change it by hand.
Only you, until you share it. People you invite get the access you picked. With Anyone with the link, anyone who has the link can view the board but not edit it. Anthropic says most artifacts shared that way open without signing in, but it doesn't say whether whiteboards do, and we didn't test it. Everyone on a board works on it live, and you can follow a teammate around the board to see what they're looking at.
Open Share and set General access back from Anyone with the link to Only people invited. On Pro, Max and Ultra, people you invited by email keep their access after that. To remove someone, open their access level and choose Remove.
Yes. Ask Claude to turn it into a doc or deck, for example "Turn this board into a project plan." Claude carries the context across artifacts, so the same plan can become a sheet or a Claude Data dashboard without explaining it again. Two of our guides pick up from there: Build a Shared Tracker in Claude Sheets, and Turn One Messy Dataset Into a Strategy Deck People Will Actually Read With Claude Design.
Send to moves the board to Lucid, Miro or Zoho Vani. To save it as a file, click Share, go to Export and choose PNG, the only file format. You can add pictures and videos to a board, but you can't import a board from a file.
Boards open in Claude Mobile, but you can't change sharing settings in Claude for iOS or Android, so share from the web or Claude Desktop. Claude Meetings, rolling out in beta on Team and Enterprise since November 12, 2026, can also build whiteboards during a Google Meet call.
Check your connection, then try again.